Deze pagina is nog niet vertaald en wordt in het Engels getoond.
TraceCut
Tools > TraceCut opens TraceCut, the tools for cutting plotters. It is also on the standard toolbar's Launch button. Select the objects to work on before opening it.
The tools are listed on the left by group: Cut, Nesting, Measure and Make. On the right are the chosen tool's settings, a preview of the selection and what the tool finds, and the buttons:
- Apply shows the result in the preview without changing the drawing;
- OK applies it and closes the window; anything it changes is undone in one step;
- Cancel closes the window without a change.
With nothing selected the preview asks you to select the objects to cut, nest or measure, and Apply and OK are greyed out (Box Maker and Folded Tray need no selection).
Folded Tray shows its pattern at once and updates it as you change a setting; there is no need to press Apply.
The Measure tools (Perimeter and Area, Cutting Time, Cost) show their results beside the preview at once, and update as you change the selection or the settings; there is no need to press Apply.
To hide TraceCut, clear Show TraceCut in Launch and the Tools menu in Options, General.
Zoom in the preview
- Turn the mouse wheel over the preview to zoom at the pointer (with or without Ctrl), or pinch on a touch screen or touchpad.
- Drag with the left or middle button (or hold Space and drag) to move the view.
- The buttons in the preview's corner zoom in, zoom out, fit the whole result, zoom to the selected objects and show them at real size (1:1).
- With the pointer over the preview, + and - zoom and 0 fits.
- Double-click the preview to fit the whole result again.
Each tool keeps its zoom while the window is open; selecting other objects fits the preview again.
Presets
Each tool keeps its settings under names you give. Pick a preset from the list to load it. The gear button shows the row to Save the settings under a name, Delete a preset, or go back to the Defaults.
Plotter Output
Cuts the selection on a cutting plotter. Choose the machine (the commands your cutter understands), the knife offset of your blade (often 0.25 mm), the overcut that closes each outline, the passes for thick material, and where the job goes:
- File saves a .plt file;
- Port sends it to a serial or USB-serial port, such as /dev/ttyUSB0 or COM3 (set the port's speed to the cutter's first, with your system's tools);
- Network sends it to the cutter's address, port 9100 unless you give another.
Plan the cut order cuts the nearest outline next and the inner outlines first. Test cut cuts a small square with a triangle inside, to check the knife before the real job. Save your cutter's settings as a preset.
CNC Toolpath
Turns the selected curves and shapes into a G-code file for a CNC router or mill. Give the tool diameter: the tool runs half of it outside each outline, so the part comes out at its drawn size, and inside each hole. Cut side set to Automatic cuts holes from the inside and outlines from the outside, whether a hole is part of the same curve or a separate object; you can also cut everything outside, inside or on the line. Open curves are always cut on the line.
The cut goes down to the total depth in passes no deeper than the depth per pass, with the tool lifted to the safe height between cuts. Set the feed rate and plunge rate in millimetres per minute and the spindle speed. X0 Y0 is the bottom-left corner of the selection or the ruler origin, Z0 the top of the material. Holes are cut before the outline around them.
Holding tabs leave short bridges of material at the bottom of the outside cuts so the parts do not move when they come free; set how many, how wide and how thick. Apply shows the toolpaths, OK saves the .nc file.
Weeding
Adds weeding lines from each object to its neighbours, or a box around each object, and a weeding frame, so the waste peels off in small pieces.
Bridges
Leaves short uncut stretches in closed outlines, so the parts stay in the sheet until you break them out.
Cut Order
Reorders the objects and their outlines for the shortest travel of the knife, inner outlines first, and sets where each outline starts and which way it runs.
CutContour
Gives the selected objects an outline in the spot color CutContour, the name print and cut workflows look for, and can remove their fill. The name is kept when you export to PDF, EPS or SVG.
Registration Marks
Adds the marks a cutter's sensor reads for print and cut, around the selection or inside the page: squares, circles or L-shaped corners, with more along long sides.
Find Duplicates
Objects lying exactly on top of another one would be cut twice. Set the tolerance, how far apart two outlines may be and still be the same, and choose whether OK deletes the repeats or selects them. The lowest object of each set stays.
Find Crossings
Outlines that cross themselves cut badly, and objects that cross each other usually need a weld first. TraceCut finds the crossings and shows them as red rings in the preview. Tick Also between objects to find crossings between different objects too. Under On OK, choose what OK does:
- Select them selects the objects that have crossings.
- Fix them rebuilds each outline that crosses itself as the outline of the area it fills and, with Also between objects, welds objects that cross each other into one.
- Move them apart moves objects that cross each other apart, each the shortest way that leaves the Spacing to the others. The lowest of each set of crossing objects stays where it is, and so do locked objects.
Each is one step of Undo.
Eyelets
In the Make group. Places marks for eyelets (grommets) on a banner or sign: small circles of the diameter you give, one in each corner and more along the edges. Choose whether they go along the selection's box or along each closed curve of the selection, how far from the edge their centres are, and whether they are at most this far apart or a number per side (corners included). OK adds the circles as a group named Eyelets.
Box Maker
In the Make group. Draws the flat panels of a box with finger joints, ready to cut from plywood or acrylic with a laser or a CNC router. It needs no selection. Give the width, depth and height, whether they are the outside or inside sizes, the material thickness and the finger width; tick open top for a box without a lid. OK adds the five or six panels side by side at the bottom left of the page, a gap apart, as a group named Box. Every finger on one panel matches a slot on the panel it joins.
Folded Tray
In the Make group. Draws the flat pattern of a tray folded from composite panel (two thin aluminium skins round a plastic core), such as a sign face with returns or the body of a light box. The fold lines are routed from the back with a V-groove cutter that leaves the front skin, the outline is cut through, and the returns are folded up by hand. It needs no selection, and the preview shows the pattern as you change the settings.
- Face width and face height are the finished sizes, outside; Size from selection takes them from the selected objects.
- Return depth is how far the sides stand back from the face; tick depth per side to give the left, right, top and bottom returns their own.
- Panel thickness and the groove allowance, the length a fold takes up (with automatic allowance, a quarter of the thickness). Check it on an offcut: fold a test piece and measure it.
- Running through: the pair of returns that run to the corners; the other two stop the corner relief short of them, so the folds never bind. A relief equal to the panel thickness makes a neat butt joint.
- Overlap flaps add a flap at each end of the through returns that folds round the corner onto the next return, to be riveted.
- Mounting ears stand out from the back edge of the returns and fold out to fix the tray to a wall, each with a hole. Choose the returns, their width and length, how many or how far apart, and the hole's size and distance from the ear's fold.
- Holes in returns: round holes along every return, for fixings or cables.
- Window: an opening in the face for a light box, inset from the face's edges, with rounded corners.
- Place: the page's bottom-left corner or beside the selection, a gap away.
The pattern is drawn as seen from the back, the side you rout, so the left return of the finished face lies on the right of the pattern. OK adds it as one group named Folded tray, holding two groups: Fold grooves (blue open lines, the first pass with the V-groove cutter) and Cut (red closed lines: holes and the window first, then the outline, the second pass). Select either group and use CNC Toolpath or Plotter Output for each pass. The last settings are kept for next time, and presets save your own.
Nesting
Shape Nesting places the selected objects on sheets or a roll by their true outlines, turning them and fitting small ones into holes, to waste as little material as possible. Rectangle Nesting does the same by their boxes, faster. Set the sheet or roll size, the margin and the spacing between objects; OK moves the objects onto the material and can draw the sheets.
Measuring
Perimeter and Area gives the outline length and the area of the selection, holes taken away. Cutting Time works out how long the cutter takes, from its speeds. Cost prices the job: the material by area or by the length of roll, cutting, weeding, pieces and machine time. These tools change nothing in the drawing.